LOESCHE – pre-owned refurbished mills: 2 x LM 20.2D and 2 x LM 19.2D
Düsseldorf – Loesche GmbH has sold 6 coal mills for grinding coal in a power plant in Belgium which were first commissioned in 1984. Due to economic reasons the power plant which was operated by Electrabel Belgium with their head office in Brussels had been decommissioned in 2014. Fortunately, Loesche got the chance to repurchase at least four of these mills, type LM 20.2D and LM 19.2D.
As usual for power plants the mills had always been kept in a perfect condition. Nevertheless, these mills will be completely refurbished and equipped with a new classifier customized for future technical specifications.
In the past years Loesche has always tried to get back the mills from power plants and find clients for these mills.
As a reference list it can be summarized that in the last 6 years LOESCHE has refurbished and sold the following second hand mills: 4x LM 19.20D, 5x LM 17.20D, 3x LM 16/1180, 7x LM 14.20D, 2x LM 12.20D and 1x LM 9/670. All these mills are again in operation with different raw materials.
Benefits for customer
The refurbished mills together with the partially new components can be sold by Loesche with a price reduction of 50 % compared to new mills.
The promoted pre-owned mills are predestined for clients who are interested in the very reliable and valuable Loesche mill technology for a unique low price level together with a reduced delivery time after consultancy with Loesche. The availability and reliability of the refurbished mills are equal to newly manufactured mills.
The mentioned refurbished mills are not only limited to one feed material but can be used for various feed material.
The disposal of the mill(s) will be carried out according to the first come first serve principal since the demand for Loesche second hand mills is very high.
For the refurbished 2x LM 20.2D and 2x LM 19.2D LOESCHE gives a warranty of 6 months for the second hand parts and 12 months for the new ones.
The load data and throughput of those mills depend on the material composition, moisture and desired product fineness. The range of capacity is between 15-50 t/h (dry base).
The specific material characteristics and guarantee values need to be confirmed by a grinding test.
For further information such as detailed scope of supply and quotations the Customer Service Sales department can be contacted under firstname.lastname@example.org